Cleaning Your Computer Hardware
Cleaning equipment, you Computer affixes as to other electrical or electronic, are not maintenance free. Rather, it requires occasional cleaning of equipment. This will give not only the performance of your computer up, but also prevent many unforeseen computer breakdowns, The obvious reason is, after we use the computer for 6 to 12 months depending on the environment, it will be a layer of dust sitting on it. This occurs even when we position our computer in a clean room. The computer parts in my own house always collect a considerable amount of dust. It would be desirable to give your computer cleaned twice a year. But before we do, we need to do a little preparation. First, get a piece of paper and a pen, a screwdriver, a pencil and a small can of spray that clean the metal parts of the electronic circuit. When we are ready, unplug the computer completely and take only the case in a well ventilated area. Open the box and take note of what you do here (this is important to help you deliver it properly). 1. Unplug all appliances off. These include hard drive, floppy, DVD-ROM and the CPU fan and the main power plug to the main board. 2. Take the battery off the main circuit. 3. Unscrew all the attached cards like Monitor, LAN, Modem, USB, Sound, CCTV, if there is (the main mother board lately has now most of these collectively assembled on the main board) and pull them carefully. 4. Use the brush to dust off all computer parts. 5. Erase the bronze color stripe part of the cards. Rub them hard until they shine. 6. Spray clean the main board, IC or chip spikes, and the needle, as the metal parts of the disk drive, floppy disk and DVD ROM. 7. Spray also all the metal parts that exceed the main board out of the back of the computer case. (Do not wipe with paper or cloth if you splash as it may cause damage to it. Let it dry). 8. Put all the cards and screw tight. 9. Reconnect all power lines. 10. Insert a spare battery main board. 11. Close the box and take to get back to the screen, keyboard and mouse. Some words of warning: 1. Please be sure to write the details when you unplug or unscrew things. You’ll need it when you put things. 2. Do this with gentleness and patience. Do not force your way through the steps in certain countries. 3. You know how to reset your CMOS BIOS after delivering the main board battery. (You may bypass steps 2 and 10 if you do not. But be careful not to spray right on the battery to prevent short-circuits) This will restore your equipment to find them looking new home when you bought it. Will significantly improve performance also compared to before the cleaning was done. It will also strengthen with some adjustments to the software. Notebooks www. discount-laptop. net
View full post on {source}
